Low-Loss Super-Wide Band Antenna over Customized Substrate
Main Article Content
Abstract
In this work, a super wide band antenna is proposed to operate in the frequency band 2.3-23 GHz. The antenna has two planar arms with a modified diamond shape printed on the opposite faces of three-layer dielectric substrate. Each arm of the antenna is capacitively coupled to circular sector near its end to increase the impedance matching bandwidth. The dielectric substrate is customized to fit the shape of the antenna arms and the parasitic elements to reduce the dielectric loss. The substrate material is composed of three layers. The upper and lower layers are Rogers RO3003TM of 0.13 mm thickness and the middle layer is made of paper of 2.3 dielectric constant and 2.7 mm thickness. The antenna is fed through a wide band impedance matching balun. The antenna design stages are performed through electromagnetic simulations concerned with the parametric study to get the optimum antenna dimensions to numerically investigate the role of the parasitic element to enhance the antenna performance. A prototype of the proposed antenna is fabricated to validate the simulation results. The experimental measurements come in good agreement with the simulation results and both of them show that the antenna operates efficiently over the frequency band 2.3-23 GHz with minimum radiation efficiency of 97% and maximum gain of 5.2 dBi. The antenna has bandwidth to dimension ratio (BDR) of 1360.
Downloads
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
D. Sagne, and R. A. Pandhare, "Design and Analysis of Inscribed Fractal Super Wideband Antenna for Microwave Applications," Progress In Electromagnetics Research C, Vol. 121, pp. 49-63, 2022.
T. Ali, B. K. Subhash, S. Pathan, and R. C. Biradar, "A compact decagonal-shaped UWB monopole planar antenna with truncated ground plane," Microwave and Optical Technology Letters, Vol. 60, No. 12, pp. 2937-2944, 2018.
R. Azim, M. T. Islam, H. Arshad, M. M. Alam, N. Sobahi, and A. I. Khan, "CPW-fed super-wideband antenna with modified vertical bowtie-shaped patch for wireless sensor networks," IEEEACCESS, Vol. 9, pp. 5343-5353, 2020.
S. Alluri, and N. Rangaswamy, "Compact high bandwidth dimension ratio steering-shaped super wideband antenna for future wireless communication applications," Microwave and Optical Technology Letters, Vol. 62, No. 12, 3985-3991, 2020.
S. Dey, and N. C. Karmakar, "Design of novel super wide band antenna close to the fundamental dimension limit theory," Scientific Reports, Vol. 10, No. 1, 16306, 2020.
M. A. Jamlos, M. F. Jamlos, S. Khatun, and A. H. Ismail, "A compact super wide band antenna with high gain for medical applications," In 2014 IEEE Symposium on Wireless Technology and Applications (ISWTA), pp. 106-109. IEEE, 2014.
S. Kundu, and A. Chatterjee, "A compact super wideband antenna with stable and improved radiation using super wideband frequency selective surface," AEU-International Journal of Electronics and Communications, Vol. 150, No. 154200, 2022.
W. Balani, M. Sarvagya, A. Samasgikar, T. Ali, and P. Kumar, "Design and analysis of super wideband antenna for microwave applications," Sensors, vol. 21, no. 2, No. 477, 2021.
M. A. Dorostkar, M. T. Islam, and R. Azim, "Design of a novel super wide band circular-hexagonal fractal antenna," Progress In Electromagnetics Research 139, 229-245, 2013.
T. Okan, "A compact octagonal‐ring monopole antenna for super wideband applications", Microwave and Optical Technology Letters, vol. 62, no. 3, pp. 1237-1244, 2020.
C. K. Ren, C. Sim, R. J. Sheen, "A compact monopole antenna for super wideband applications," IEEE Antennas Wireless and Propagation Letters, vol.10, pp. 488-491, 2011.
M. A. Dorostkar, M. T. Islam, R. Azim, "Design of a novel super wide band circular-hexagonal fractal antenna,", Progress in Electromagnetics Research, vol. 139, pp. 229-245, 2013.
S. Kundu, and A. Chatterjee, "A compact super wideband antenna with stable and improved radiation using super wideband frequency selective surface," AEU-International Journal of Electronics and Communications, vol. 150 No. 154200, 2022.
P. Ramanujam, P. G. R. Venkatesan, C. Arumugam, and M. Ponnusamy, "Design of miniaturized super wideband printed monopole antenna operating from 0.7 to 18.5 GHz," AEU-International Journal of Electronics and Communications 123, 153273, 2020.
S. Alluri and N. Rangaswamy, "Compact high bandwidth dimension ratio steering‐shaped super wideband antenna for future wireless communication applications," Microwave and Optical Technology Letters, Vol. 62, no. 12, pp. 3985-3991, 2020.