Influence of the common mode impedance paths on the design of the EMI filters used with SiC-buck converter
Main Article Content
Abstract
This paper deals the design of EMI filter associated with buck converter using fast semiconductors silicon carbide SiC (diode and transistor JFET). To comply with EMC standards, a filter design method based on an equivalent electrical circuit is proposed. The aim is to identify the different values of the EMI filter elements but also to obtain the limits values of the parasitic elements of the passive components which have a major influence on the attenuation of the filters. The purpose is to study the influence of the modification of the common mode propagation paths before and after the installation of the filter. A solution is also proposed to reduce the conducted disturbances that occur at high frequency caused by the fast SiC components.The comparison of the simulation results with the measurements data carried out on a DC-DC converter without and with the EMI filter, shows the effectiveness of the proposed design approach.
Downloads
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
D. A. Weston, "Electromagnetic compatibility: Principles and applications", Ed. Marcel Dekker, New York, 2001.
G. Laimer, J.W. Kolar, "'Zero'-ripple EMI input filter concepts for application in a 1-U 500 kHz Si/SiC three-phase PWM rectifier", Telecommunications Energy Conference, 2003. INTELEC '03. The 25th International; Power, Energy, & Industry Applications, Page(s): 750 - 756.
X. Gong, J. A. Ferreira, J. Popovic-Gerber," Comparison and suppression of conducted EMI in SiC JFET and Si IGBT based motor drives", Power Electronics and Motion Control Conference (EPE/PEMC), 15th International, 2012.
R. Robutel, C. Martin, H. Morel, P. Mattavelli, D. Boroyevitch, R. Meuret, N. Gazel, "Integrated common mode capacitors for SiC JFET inverters", Applied Power Electronics Conference and Exposition (APEC), 2011 Twenty-Sixth Annual IEEE, Power, Energy, & Industry Applications, Page(s): 196 - 202.
X. Gong, I. Josifovi’c, J. A. Ferreira, "Modeling and Reduction of Conducted EMI of Inverters With SiC JFETs on Insulated Metal Substrate", IEEE Transactions on Power Electronics, Vol. 28, No. 7, July 2013.
X. Gong, I. Josifovi’c, J. A. Ferreira, "Modeling and Reduction of Conducted EMI of Inverters With SiC JFETs on Insulated Metal Substrate", IEEE Transactions on Power Electronics, Vol. 28, No. 7, July 2013.
X. Gong, J. A. Ferreira, "Modeling and reduction of conducted EMI in SiC JFET motor drives with insulated metal substrate", Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, Power, Energy, & Industry Applications, Page(s): 629 - 636.
H. Akagi, H. Hasegawa, T. Doumoto, "Design and performance of passive EMI filter for use with a voltage-source PWM inverter having sinusoidal output voltage and zero common-mode voltage", IEEE Transactions on Power Electronics, vol.19, N°4, july 2004, pp.1069-1076.
A. Roch, H. Bergsma, F. B. J. Leferink, "Design of an EMI Output Filter for Frequency Converter", in Proc. EMC Europe International Symposium on EMC, Barcelona, Spain, 2006.
W. Xiaofeng, X. Dehong, Z. Yanjun, C. Yi, O. Yasuhiro, M. Kazuaki, "Integrated EMI Filter Design with Flexible PCB Structure", IEEE Power Electronics Society, PESC08, Rhodes, Greece, June 15-19 2008, CD proceeding, pp. 1613-1617.
H. Chen, Z. Qian, Z. Zeng and C. Wolf, "Modeling of parasitic inductive couplings in a Pishaped common mode EMI filters", IEEE Trans. On Electromagnetic Compatibility, Vol.50 N°1, February 2008.
J.L. Kotny, T. Duquesne, N. Idir, "EMI Filter design using high frequency models of the passive components", IEEE Workshop on Signal Propagation on Interconnects (SPI 2011), 8 -11 may 2011, Naples, Italy, 5-2011.
J.L. Kotny, T. Duquesne, N. Idir, "Méthode de dimensionnement d'un filtre CEM pour un convertisseurs utilisant des composants SiC", Colloque International et Exposition sur la Compatibilité Electromagnétique - Rouen- CEM 2012.esigelec-25-26 et 27 Avril 2012.
F. Y. Shih, D. Y. Chen, Y. P. Wu, and Y. T. Chen, "A procedure for designing EMI filters for AC line applications," IEEE Trans. Power Electron, Vol. 11, N° 1, pp.170-181, 1996.
V. Tarateeraseth, Bo Hu, Kye Yak See, F. G. Canavero, "Accurate Extraction of Noise Source Impedance of an SMPS Under Operating Conditions", IEEE Transactions on Power Electronics, Vol. 25, No. 1, January 2010.
J.L. Kotny, T. Duquesne, N. Idir, J.L. Kotny, X. Margueron, N. Idir : "High Frequency Model of the coupled inductors used in EMI Filters". IEEE Transactions on Power Electronics – Vol. 27, N°6, pp 2805-2812, 6-2012.
J.L. Kotny, X. Margueron, N. Idir "High Frequency Modeling Method of EMI filters". IEEE Energy Conversion Congress and Exposition - ECCE09, 20-24 Septembre 2009, San Jose, Californie, USA.
A. Majid, J. Saleem, K. Bertilsson, "EMI filter design for high frequency power converters" Environment and Electrical Engineering (EEEIC), 2012 11th International Conference on. Pages : 586-589, DOI :10.1109/ EEEIC. 2012.6221444 IEEE Conference Publications.
R. Wang, H.F. Blanchette, D. Boroyevich, P. Mattavelli, "EMI noise attenuation prediction with mask impedance in motor drive system", Applied Power Electronics Conference and exposition (APEC), 2012 Twenty-seventh Annual IEEE, pages: 2279 – 2284, IEEE Conference Publications.
V. Tarateeraseth, "EMI filter design: part II: Measurement of noise sources impedances", Electromagnetic Compatibility Magazine, IEEE, vol. 1, pp.42-49, 2012.