Review on Design of Frequency Selective Surfaces based on Substrate Integrated Waveguide Technology
Main Article Content
Abstract
The spectacular development of frequency selective surfaces (FSS) as a spatial filter, absorbers and reflectors made them feasible for the aerospace and defence applications. The intervention of substrate integrated waveguide (SIW) technology into FSS results in the improvement of unit cell structures and better performance by isolating them from inter-element interference. Such FSS structures with SIW cavities upholds the FSS properties and improves their selectivity and performance. Considering the diversity in applications of introducing SIW cavity technology into FSS, the aim of this paper is to furnish a study on the glimpse of EM design techniques to analyze this type of structures. Design topologies of narrowing bandwidth, dual resonance, the design of FSS with sharp sideband edges and frequency selective polarization rotating structures are presented. Further, a novel design for improving the bandwidth of reflective FSS is discussed based on SIW technology. Fabrication techniques pertaining to this type of structures are presented in brief.
Downloads
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
B. A Munk, Frequency selective surfaces: Theory and design, Wiley, New York, 2000.
R. J. Langley, E. A. Parker, "Equivalent circuit model for arrays of square loops," Electronics Letters, Vol. 18, no. 7, pp. 294-296, 1 April 1982.
T. S. MOK and E. A. PARKER, "Gridded square frequency-selective surfaces," International J. of Electronics, Vol. 61, no. 2, pp. 219-224, 24 8 1986.
R. Orta, P. Savi and R. Tascone, "The Effect of Finite Conductivity on Frequency Selective Surface Behavior," J. of Electromagnetics, Vol. 10, no. 3, pp. 213-227, 7 1990.
R. J. Langley, A. J. Drinkwater, "Improved empirical model for the Jerusalem cross," IEE Proc. Vol. 129, no. 1, pp. 1-6, February 1982.
J. C. Vardaxoglou, E. A. Parker, "Performance of two tripole arrays as frequency-selective surfaces," Electronics Letters, Vol. 19, no. 18, pp. 709-710, 1st September 1983.
C. K. Lee, R. J. Langley, "Equivalent-circuit models for frequency selective surfaces at oblique angle of incidence," IEE Proc., Vol. 132, no. 6, pp. 395-399, February 1982.
Y. Yang, H. Zhou, X.-H. Wang and Y. Mi, "Low-pass frequency selective surface with wideband high-stop response for shipboard radar," J. of Electromagnetic Waves and Applications, Vol. 27, no. 1, pp. 117-122, jan. 2013.
B. A. Munk, Finite Antenna Arrays and FSS: Wiley, New York, 2003.
W.-T. Wang, S.-X. Gong, X. Wang, H.-W. Yuan, J. Ling and T.-T. Wan, "RCS Reduction of Array Antenna by Using Bandstop FSS Reflector," J. of Electromagnetic Waves and Applications, Vol. 23, no. 11-12, pp. 1505-1514, Jan. 2009.
P. Kong, X. Yu, M. Zhao, Y. He, L. Miao and J. Jiang, "Switchable frequency selective surfaces absorber/reflector for wideband applications," J. of Electromagnetic Waves and Applications, Vol. 29, no. 11, pp. 1473-1485, Jul. 2015.
C. de Lucena Nóbrega, M. Ribeiro da Silva, P. H. da Fonseca Silva and A. G. D'Assunção, "Analysis and design of frequency selective surfaces using teragon patch elements for WLAN applications," J. of Electromagnetic Waves and Applications, Vol. 28, no. 11, pp. 1282-1292, jul. 2014.
P. Kim, D. Lee, I. Seo and G. Kim, "Low-observable radomes composed of composite sandwich constructions and frequency selective surfaces," Composites Science and Technology, Vol. 68, no. 9, pp. 2163-2170, Jul. 2008.
R. U. Nair and R. M. Jha, "Electromagnetic Design and Performance Analysis of Airborne Radomes: Trends and Perspectives [Antenna Applications Corner]," IEEE Antennas and Propagation Magazine, Vol. 56, no. 4, pp. 276-298, Aug. 2014.
E. A. Parkar, et al., "Application of FSS structure to selectively control the propagation of signals into and out of buildings," Tech. Rep. AY4464, ERA Technology Ltd., 2005.
R. R. Xu, H. C. Zhao, Z. Y. Zong and W. Wu, "Dual-Band Capacitive Loaded Frequency Selective Surfaces With Close Band Spacing," IEEE Microwave and Wireless Components Letters, Vol. 18, no. 12, pp. 782-784, Dec. 2008.
K. Sarabandi and N. Behdad, "A Frequency Selective Surface With Miniaturized Elements," IEEE Trans. on Antennas and Propagation, Vol. 55, no. 5, pp. 1239-1245, May 2007.
F. Bayatpur and K. Sarabandi, "Single-Layer High-Order Miniaturized-Element Frequency-Selective Surfaces," IEEE Trans. on Microwave Theory and Techniques, Vol. 56, no. 4, pp. 774-781, April 2008.
S. M. Amjadi and M. Soleimani, "Narrow Band-Pass Waveguide Filter Using Frequency Selective Surfaces Loaded with Surface Mount Capacitors," 2007 International Conference on Electromagnetics in Advanced Applications, Torino, pp. 173-176, 2007.
K. Joardar, "Comparison of SOI and junction isolation for substrate crosstalk suppression in mixed mode integrated circuits," Electronics Letters, Vol. 31, no. 15, pp. 1230-1231, Jul 1995.
H. B. Wang and Y. J. Cheng, "Frequency Selective Surface With Miniaturized Elements Based on Quarter-Mode Substrate Integrated Waveguide Cavity With Two Poles," IEEE Trans. on Antennas and Propagation, Vol. 64, no. 3, pp. 914-922, March 2016.
J. H. Wu, J. Scholvin, J. A. del Alamo and K. A. Jenkins, "A Faraday cage isolation structure for substrate crosstalk suppression," IEEE Microwave and Wireless Components Letters, Vol. 11, no. 10, pp. 410-412, Oct. 2001.
R. R. Xu, H. C. Zhao, Z. Y. Zong and W. Wu, "Loaded frequency selective surfaces using substrate integrated waveguide technology," Microwave and optical technology letters, Vol. 50, no. 12, pp. 3149-3152, Dec. 2008.
G. Q. Luo et al., "Theory and experiment of novel frequency selective surface based on substrate integrated waveguide technology," IEEE Trans. on Antennas and Propagation, Vol. 53, no. 12, pp. 4035-4043, Dec. 2005.
G. Q. Luo, W. Hong, H. J. Tang and K. Wu, "High Performance Frequency Selective Surface Using Cascading Substrate Integrated Waveguide Cavities," IEEE Microwave and Wireless Components Letters, Vol. 16, no. 12, pp. 648-650, Dec. 2006.
G. Q. Luo et al., "Filtenna Consisting of Horn Antenna and Substrate Integrated Waveguide Cavity FSS," IEEE Trans. on Antennas and Propagation, Vol. 55, no. 1, pp. 92-98, Jan. 2007.
G. Q. Luo, W. Hong, H. J. Tang and K. Wu, "Dualband frequency-selective surface using substrate integrated waveguide technology," IET Microwave and Antenna propagation, Vol. 1, no. 2, pp. 408-413, April 2007.
N. N. Qi, S. X. Gong, Y. J. Zhang, and J. F. Liu, "Reducing bandwidth of FSS using substrate integrated waveguide technology," J. of Electromagnetic waves and applications, Vol. 22, no. , pp. 2087-2096, 2008.
H. Zhou, S. Qu, Z. Pei, J. Zhang, B. Lin, J. Wang, H. Ma and C. Gu, "Narrowband frequency selective surface based on substrate integrated waveguide technology," Progress In Electromagnetics Research Letters, Vol. 22, no. , pp. 19-28, March 2011.
P. Kong, X. Yu, M. Zhao, Y. He, L. Miao and J. Jiang, "Switchable frequency selective surfaces absorber/reflector for wideband applications," J. of Electromagnetic Waves and Applications, Vol. 29, no. 11, pp. 1473-1485, 24 7 2015.
G. Q. Luo, W. Hong, Q. H. Lai and L. L. Sun, "Frequency –selective surfaces with two sharp sidebands realized by cascading and shunting substrate integrated waveguide cavities," IET microwave Antenna propagation, Vol. 2, no. 1, pp 23-27, February 2008.
Y. Cassivi, L. Perregrini, P. Arcioni, M. Bressan, K. Wu and G. Conciauro, "Dispersion characteristics of substrate integrated rectangular waveguide," IEEE Microwave and Wireless Components Letters, Vol. 12, no. 9, pp. 333-335, Sept. 2002.
V.V.S. Prakash, S. Christopher, "A Selective Survey of the Waveguide-Fed Slot Radiators," IETE Technical Review, Vol. 17. nos. 1&2, pp. 51-59, April 2000.
P. Kong, X. Yu, M. Zhao, Y. He, L. Miao and J. Jiang, "Switchable frequency selective surfaces. J. of Electromagnetic Waves and Applications, Vol. 29, no. 11, pp. 1473-1485, Jul. 2015.
Shiv Narayan, K. M. Divya, V. Krushna Kanth, "FDTD Modeling of EM Field inside Microwave Cavities," Springer Nature, 2017.
D.M. Sullivan, "Electromagnetic Simulation using the FDTD Method" IEEE Press, 2000.
M. Piket-May, A. Taflove and J. Baron, "FD-TD modeling of digital signal propagation in 3-D circuits with passive and active loads," IEEE Trans. on Microwave Theory and Techniques, Vol. 42, no. 8, pp. 1514-1523, Aug 1994. 38. N. N. Qi, S. X. Gong, P. F. Zhang, J. F. Liu, "A novel Y-loop aperture frequency selective surface using substrate-integrated waveguide technology", Microwave and Optical Technology Letters, Vol. 50, no. 12, pp. 3023-3027, Dec. 2008.
X. C. Zhu, W. Hong and K. Wu, H. J. Tang, Z. C. Hao, J. X. Chen, G. Q. Yang "A Novel Reflective Surface With Polarization Rotation Characteristic," IEEE Antennas and Wireless Propagation Letters, VOL. 12, pp. 968-971, 2013.
M. S. M. Mollaei,"Narrowband Configurable Polarization Rotator Using Frequency Selective Surface Based on Circular Substrate-Integrated Waveguide Cavity," IEEE Antennas And Wireless Propagation Letters, VOL. 16, pp. 1923-1926, Mar. 2017.
S. A. Winkler, W. Hong, M. Bozzi, and k. Wu, "polarization rotating frequency selective surface Based on substrate integrated waveguide technology" IEEE Trans. on Antennas and Propagation, Vol. 58, no. 4, april 2010.
M. Bozzi, L. Perregrini, J. Weinzierl, and C. Winnewisser, "Efficient analysis of quasi-optical filters by a hybrid MoM/BI-RME method, " IEEE Trans. Antennas Propag., vol. 49, no. 7, pp. 1054–1064, Jul. 2001.
M. Bozzi and L. Perregrini, "Analysis of multilayered printed frequency selective surfaces by the MoM/BI-RME method," IEEE Trans. Antennas Propag., vol. 51, no. 10, pp. 2830–2836, Oct. 2003.
Chao-Chun Chen, "Scattering by a two-dimensional periodic array of conducting plates," in IEEE Transactions on Antennas and Propagation, vol. 18, no. 5, pp. 660-665, Sep 1970.
R. Kieburtz and A. Ishimaru, "Scattering by a periodically apertured conducting screen," in IRE Transactions on Antennas and Propagation, vol. 9, no. 6, pp. 506-514, November 1961.
R. H. Ott, R. G. Kouyoumjian and L. Peters, "Scattering by a two-dimensional periodic array of narrow plates," in Radio Science, vol. 2, no. 11, pp. 1347-1359, Nov. 1967.
Bozzi, M., A. Georgiadis, and K. Wu. "Review of substrate-integrated waveguide circuits and antennas", IET Microwaves Antennas & Propagation, Vol. 5, no. 8, pp. 909-920, 2011.
K. Wu, "Towards system-on-substrate approach for future millimetre wave and photonic wave application," Proceeding of Asia-pacific microwave conference, 2006.
Yu Wang, Jianming Zhou, Yinqiao Li and Xiao Yang, "Design of a Ka-band dual-mode filter based on LTCC technology," 2015 IEEE 6th International Symposium on Microwave, Antenna, Propagation, and EMC Technologies (MAPE), Shanghai, 2015, pp. 604-607.
H. Chu, Y. X. Guo, Y. L. Song and Z. L. Wang, "40/50 GHz diplexer design in LTCC technology," Electronics Letters, Vol. 47, no. 4, pp. 260-262, February 17 2011.
B. J. Chen, T. M. Shem and R. B. Wu, "Dual-band Vertically Stacked Laminated Waveguide filter Design in LTCC Technology, " IEEE Trans. on Microwave Theory and Techniques, Vol. 57, no. 6, pp. 1554-1562, Jun. 2009.