Circularly Polarized Split Ring Resonator Loaded Slot Antenna
Main Article Content
Abstract
A compact circularly polarized printed slot antenna operating at 2.45 GHz is reported. The antenna consists of a pair of rotated square split ring resonators (SRR) inside a rectangular slot etched on the ground plane of an FR-4 dielectric substrate. A microstrip open-loop feed is etched on the backside of the dielectric substrate to feed the slot and the split ring resonators. The overall size of the antenna is 60x42x1.6 mm3. The measured -10dB impedance bandwidth is 10.48% (2.38-2.64 GHz) and the measured 3dB axial ratio (AR) bandwidth covers the entire impedance bandwidth.
Downloads
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
Ramesh Garg, Prakash Bhartia, Inder Bahl and Apisak Ittipiboon, Microstrip Antenna Design Handbook, Artech House, London, Chp. 7, 'Microstrip Slot Antennas'.
Yoshimura Y.: "A microstripline slot antenna", IEEE Trans. Microw. Theory Tech., MTT-20, pp. 760-762, 1972.
M.T. Kahrizi, K. Sarkar, and Z.A. Maricevic, "Analysis of a wide radiating slot in the ground plane of a microstrip", IEEE Trans Microwave Theory Tech., vol. 41, pp. 29-37, 1993.
R. Garg, P. Bhartia, A. Bahl, and A. Ittipibon, "Microstrip antenna design handbook", Artech House, Inc., Norwood, MA, 2001.
Y.C. Lee and J.S. Sun, "Compact printed slot antennas for wireless dualband multi-band operations", Prog Electromagn Res., vol. 88, pp. 289-305, 2008.
Latif S.I. et al., "Bandwidth enhancement and size reduction of microstrip slot antennas", IEEE Trans. Antennas Propag., vol. 53, pp. 994-1003, 2005.
R. Singha, D. Vakula, "Low side lobe tapered slot antenna with high gain using gradient refractive index metamaterial for ultra wideband application", Advanced Electromagnetics, Vol. 6, No. 4, pp. 63-69, Nov 2017.
Q. Zhao et al., "Compact wide-slot tri-band antenna for WLAN/WiMAX applications", Progress in Electromagnetics Research Lett, Vol. 18, pp. 9-18, 2010.
W. Hu et al., "Compact CPW-fed square slot antenna for dual-band operation", Progress in Electromagnetics Research Lett., vol. 20, pp. 165-173, 2011.
K.L.Wong, Chien-Chin Huang, Wen-Shan Chen, "Printed ring slot antenna for circular polarization", IEEE Trans. Antennas Propag., vol. 50, pp. 75-77, 2002.
K.G. Jangid, P.K. Jain, B. R. Sharma, V.K. Saxena, V.S. Kulhar, D. Bhatnagar, "Ring Slotted Circularly Polarized U-Shaped Printed Monopole Antenna for Various Wireless Applications", Advanced Electromagnetics, Vol. 6, No. 1, pp. 70-76, March 2017.
Seshadri Binaya Behera, Debaprasad Barad and Subhrakanta Behera, "A Triple-band Suspended Microstrip Antenna with Symmetrical U-Slots for WLAN/WiMax Applications", Advanced Electromagnetics, Vol. 7, No. 2, pp. 41-47, March 2018.
Ines Kharrat, Pascal Xavier, Tan-Phu Vuong, and Guy Eymin Petot Tourtollet, "Compact Rectenna Design for Lossy Paper Substrate at 2.45GHz", Progress In Electromagnetics Research C, Vol. 62, pp. 61-70, 2016.
Wang C.J., and W.T. Tsai, "A Stair-shaped slot antenna for the triple-band WLAN applications", Microwave Opt. Technol. Letters, vol. 39, pp. 370-372, 2003.
Yingying Tan, Liping Yan, Xiang Zhao, Changjun Liu, and Kama Huang, "Bandwidth Enhancement of a Printed Slot Antenna with a Diamond-Shaped Tuning Stub", Progress in Electromagnetics Research C, Vol. 50, pp. 87-93, 2014.
Wei-Chung Weng, Jia-Yi Sze, and Chiao-Feng Chen, "A Dual-Broadband Circularly Polarized Slot Antenna for WLAN Applications", IEEE Transactions on Antennas and Propagation, Vol.62, No.5, pp. 2837-2841, 2014.
M.J. Chiang Tian‐Fu Hung, Sheau‐Shong Bor, "Dual-band circular slot antenna design for circularly and linearly polarized operations", Microwave Opt. Technol Letters, vol. 52, pp. 2717-2721, 2010.
Thuy Nguyen Thi, Son Trinh-Van, Gina Kwon, and Keum Cheol Hwang, "Single-Feed Triple Band Circularly Polarized Spidron Fractal Slot Antenna", Progress in Electromagnetics Research, Vol. 143, pp. 207-221, 2013.
K. L. Wong and J. Y. Wu, "Single-Feed Small Circularly Polarized Square Microstrip Antenna", Electron. Lett., Vol. 33, pp. 1833-1834. 1997.
Yong-Xin Guo; Diana Chia Hua Tan, "Wideband Single-Feed Circularly Polarized Patch Antenna With Conical Radiation Pattern", IEEE Antennas and Wireless Propagation Letters. Vol. 8, pp. 924-926, 2009.
Jeen-Sheen Row and Kuang-Woei Lin, "Design of an annular-ring microstrip antenna for circular polarization", Microwave and Optical Technology Letters, Vol. 42., No. 2, pp. 156-157, 2004.
Yuan-Ming Cai, Shu-Feng Zheng, Ying-Zeng Yin, Jiao-Jiao Xie, and Ke Li, "Single-Feed Circularly Polarized Annular Slot Antenna for Dual-Broadband Operation", Progress in Electromagnetics Research C, Vol. 39, pp. 91-101, 2013.
Ferdows B Zarrabi et al., "Microstrip slot antenna applications with SRR for WiMAX/WLAN with Linear and Circular Polarization", Microwave Opt Technol Lett., vol. 57, pp. 1332-1338, 2015.